Getting
started
Image Engineering
CAL2
Seite
4
von
11
1.3 General Safety Information
WARNING!
Some LEDs are emitting invisible light in the IR and UV near area.
•
Do not
look directly into the emitted light or look through the optical LED system.
•
Do not
look directly in the open sphere or light source when using high intensities or
sequences with low response time.
•
Do not
open the device without any instructions from the Image Engineering support
team or when connected to the power supply.
2 GETTING STARTED
2.1 Scope of delivery
•
CAL2
•
calibration device (spectrometer)
•
power cord
•
USB cable
•
control software
•
calibration protocol
•
2 plates for connecting the spectrometer
Optional equipment:
•
iQ-Analyzer
software (shading module)
This module includes a special chart layout file that allows analysis of images with and
without a keyhole effect.
•
iQ-Trigger:
The iQ-Trigger is a mechanical finger that can press the release button
within 25 ms. When working with touchscreens, exchange the solid fingertip for a touch-
pen tip.
