Additional
information
Image Engineering
CAL2
Seite
10
von
11
5.2 Care instructions
•
Do not touch, scratch, or pollute the diffusor.
•
If there is any dust on the diffusor, clean it with an air blower.
•
Do not remove the fiber from the spectrometer. Otherwise, the calibration is invalid, and
the spectrometer has to be
recalibrated
!
•
Only store and transport the CAL2 in the delivered hard case.
5.3 Disposal instructions
After the service life of CAL2, it must be disposed of properly. Electrical and electromechanical
components are included in CAL2. Observe your national regulations. Make sure that CAL2
cannot be used by third parties after disposing of it.
Contact Image Engineering if assistance for disposal is required.
