10
TORQUE MEASUREMENT
Between 90% – 99% of the preset value the
LED indicator flashes and an intermittent
beep sounds.
At 100% and over the LED indicator stays
lit and a continuous beep sounds.
Press and release (do not hold)
P
to turn
on the power. After ‘0’ appears, press and
release the
M
button to select a preset.
Apply torque gradually and indicators
appear as follows:
INTERMITTENT FLASH AND BEEP
AT 90% OF PRESET
CONTINUOUS LIGHT AND BEEP
AT 100% OF PRESET
5. GO/NO GO Preset Operation
9 . 0 0
1
lbf-in
10.00
1
lbf-in
beeeep!
10 . 0 0
1
lbf-in
bip, bip, bip...
Applying Torque
1. Stop when you see or hear the intermittent alert if you do not
want to exceed the preset torque value of 10.00 lbf-in. or
2. Stop after the alert becomes continuous to tighten to a minimum
of 10.00 lbf-in.
