iLOQ Oy • Oulu, Finland • www.iLOQ.com • iLOQ is registered trademark of iLOQ Oy •
©2018 iLOQ Oy. All Rights Reserved •
E
F
6. INSTALLATION OF ILOQ D50S.3XX(A).SD SERIES
A
B
C
A.
Loosen the screw from the turning knob using a 2-mm Allen key.
B.
Remove the turning knob.
C.
Ensure the cam is pointing downwards. Slide the lock cylinder through the lock case. Make
sure the cylinder frame is a maximum of 1.0 mm from the door leaf or escutcheon.
D
G
D.
Fix the cylinder into the lock case using an iLOQ fixing screw (A10.64). If necessary, cut the
screw. Use a tightening torque of 0.9…1.1 Nm.
E.
The knob distance can be adjusted if needed. Please refer to chapter 8
KNOB CHANGE / DISTANCE
ADJUSTMENT
for details.
F.
Put the turning knob in place.
G.Tighten the screw. Use a tightening torque of 0.55…0.65 Nm.