iLOQ Oy • Oulu, Finland • www.iLOQ.com • iLOQ is registered trademark of iLOQ Oy •
©2018 iLOQ Oy. All Rights Reserved •
C
3. CARE
The product is designed to be maintenance-free. It doesn’t require any regular maintenance.
4. INSTALLATION OF ILOQ D50S.1XX(A).SD SERIES
A
B
A.
Ensure the cam is pointing downwards. Slide the lock cylinder through the lock case.
B.
Fix the cylinder into the lock case using an iLOQ fixing screw A10.64. If necessary, cut the screw.
Use a tightening torque of 0.9...1.1 Nm. Make sure the cylinder frame is a maximum of 1.0 mm
from the door leaf or escutcheon.
C.
The knob distance can be adjusted if needed. Please refer to chapter 8
KNOB
CHANGE / DISTANCE ADJUSTMENT
for details.