iLOQ Oy • Oulu, Finland • www.iLOQ.com • iLOQ is registered trademark of iLOQ Oy •
©2018 iLOQ Oy. All Rights Reserved •
1. BEFORE INSTALLATION
1. The instructions should be carefully followed during installation. These instructions
and any maintenance instructions should be passed on by the installer to the user.
2. iLOQ D50S cylinders must be installed and used carefully without excessive force.
3. The product should not be modified in any way except in accordance with the
modifications described in these instructions.
4. Where the D50S cylinder is manufactured in more than one size it is critical that the
correct size is selected.
5. Care should be taken to ensure that any seals or weather-stripping fitted to the complete
door assembly, does not inhibit the correct operations of D50S cylinder.
6. Care should be taken to ensure that no projection of the D50S cylinder and associated
parts, can prevent the door swinging freely.
7. All components necessary for the specific installation should be fitted in order to
ensure compliance with EN15684 standard.
8. Before fitting D50S cylinder to a fire/smoke resisting door, the fire certification
should be examined, to ensure conformity.
9. The iLOQ cylinders are successfully tested according the EN 1634-1 (EUFI29-19003368) for 120
minutes in a hinged single leaf steel door.
10. The cylinder must project less than 1 mm on outside of the door to ensure proper operation.
11. No liability is accepted for damage to the doors or components due to incorrect installation.
12.
To extend the cylinder length use only the associated D50 cylinder extensions
(AD50.Exx).
13.
It is not allowed to uninstall resp. demount the anti-panic mechanism because due
to that the mechanism and functionality of the panic functionality can not be
guaranteed anymore.
14. In the case the panic mechanism of the panic mortise locks can be blocked or
influenced in a negative way by the cylinder cam, it is mandatory to install the panic
cylinder (D50S.7xx). The use of the other cylinder types (D50S.1xx/2xx/3xxx etc.) are
only allowed if the lock do not need a specific cam position resp. the cam could not
block the panic functionality. Please double-check the declaration of conformity of the
mortise lock manufacturers.
15. When used in combination with panic locks, it is essential to ensure after installation that
all parts of the lock are in an operational condition and that the panic function of the
mortise lock is guaranteed.
16. To meet the German VdS (VdS Schadenverhütung GmbH) requirements class CZ+ on
burglary threatened doors use D50S.XXXA.SD high security cylinder installed with a VdS
approved security lock furniture of class B or C.
17. The cylinders may only be used for the purpose of opening and locking doors; other use
is not permitted.
18. We reserve the right to make modifications or further technical developments without further
notice.
19. If there are any deviations from the contents in foreign language versions of the
documentation, the English original shall apply in case of doubt.
2. AFTER INSTALLATION
Test the cylinder functionality after installation to ensure that it doesn’t prevent the lock case from
working properly.