Installation and Operation
5
Installation and Operation
5.1 Unpacking
Carefully unpack the biovac 106 Safety Aspiration-System.
Check for:
•
Transport damage,
•
Conformity with the specifications of the supply contract (type, electrical supply data),
•
Completeness of the delivery.
Please inform Ilmvac GmbH without delay if there are discrepancies between the delivery
and the contractually agreed scope of delivery, or if damage is detected.
Please take note of the General Terms for Delivery and Payment of ILMVAC GmbH.
In case of a claim under warranty, the device must be returned in packaging that is
suitable for protecting it during transport.
5.2
Installation and Connection
1.
Set the safety aspiration-system on a
flat and horizontal surface.
2.
Connect the handpiece (pipette holder)
to the suction line
(1)
.
3.
Connect the suction pipe to the
building ventilation system
(2)
.
4.
If required, connect the foot switch
(accessories optional)
to the socket
(3)
provided on the unit.
5.
Set the mode selector switch
(4)
to
"Hand" or "Foot"
(see option, point 5
)
.
6.
Voltage selector 115/230 V
(5)
Label on device:
7.
Connect the safety aspiration pump to
the power supply
(6)
.
8.
Switch on the unit's main switch
(7)
.
Fig. 3 Safety Aspiration-System biovac 106
rear side - connections
112012
11
