IMPORTANT SAFETY INSTRUCTIONS
SPECIFICATIONS
ASSEMBLY INSTRUCTION
Page 3
360˚ TRIPOD WORKLIGHT SPECIFICATIONS
PRODUCT WEIGHT
PRODUCT FOOT PRINT
PRODUCT HEIGHT
CORD
RATED LED LIFE
INPUT RATING
OUTPUT RATING
10.1 lbs
38" x 38"
71 in.
5 ft., 18/3, SJTW
50,000 Hours
120 VAC 50/60 Hz
33 WATTS
ADJUSTING TRIPOD (Fig.1)
1. Depress and hold release button (D) then push down on leg connector (C) until the legs (E) are fully extended and lock in place.
2. Adjust the height of tripod (B) by un-latching the couplers (A) and raising the center pole of tripod (B). Latch and lock the couplers (A) when desired
height is reached.
ATTACHING LIGHT PANEL
1. Attach metal frame of the light panel to the top of the tripod and secure with the knob (F).
FIG 1
D
A
B
C
E
F
FIG 2
0
I
360
0
G
H
• Do not use a pressure washer to clean this product.
• Do not modify the work light in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are
specific applications for which the work light was designed.
• Store work light in a secure place out of the reach of children. Inspect it for good working
condition prior to storage and before re-use.
TURNING WORKLIGHT ON AND OFF (Fig.2)
1. Swing open light panels (G) to expose all three LED panels. The side panels can rotate open
between 0º and 360º.
2. Insert plug (H) into a 110-120 VAC electrical outlet and toggle the On/Off switch (I) to turn
light on or off.
