background image

PERSONAL SAFETY

POWER TOOL USE AND CARE

SERVICE

d) Remove any adjusting key or wrench before turning the power tool on.

     A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times.

   This enables better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.

    Loose clothes, jewelry or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities,ensure these are connected and properly used.

    Use of dust collection can reduce dust-related hazards.

a) Do not force the power tool. Use the correct power tool for your application.

    The correct power tool will do the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off.

    Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments,
    changing accessories, or storing power tools.

    Such preventive safety measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions
to operate the power tool.

    Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect
    the power tools operation. If damaged, have the power tool repaired before use.

     Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean.

    Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions
    and the work to be performed.

    Use of the power tool for operations different from those intended could result in a hazardous situation.

a) Have your power tool serviced by a qualified repair person using only identical replacement parts.

    This will ensure that the safety of the power tool is maintained.

Page 2

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT.

Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. 

                         RISK OF ELECTRIC SHOCK. 

Do not use with extension cord near water or where water may accumulate. Keep work light at least 16 feet 

from pools and spas. Keep plugs and receptacles dry. Use only three wire outdoor extension cords with grounded plugs and grounded receptacles.

                           TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY.  

Do not use with extension cord near water or where water

may accumulate. Keep work light at least 16 feet from pools and spas. Keep plugs and receptacles dry. Use only three wire outdoor extension cords with
grounded plugs and grounded receptacles.
• Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for wet location work light. Receptacles are
   available having the built-in GFCI protection and are able to be used for this measure of safety.

• Use only with an extension cord for outdoor use, such as an extension cord of cord type: SW, SW-A, SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW, 
   SJW-A, SJOW, SJOW-A, SJTW, SJTW-A, or SJTOW, SJTOW-A.

• Do not look directly at the lighted lamps to avoid eye injuries.

• Always keep the work light away from any flammable surface or materials.

• Always check damaged or worn-out parts before using the work light. Broken parts will affect the work light operation. Replace or repair damaged or worn
   parts immediately. If repairs are needed, consult a professional electrician.

CAUTION:

WARNING:

Отзывы: