Illinois Tool Works SIMCO PulseFlow PFC, Инструкция по эксплуатации

Страница: 3 / 9

WARNING!
When working on ANY electrical equipment be sure to disconnect the unit from
its power source to prevent any kind of electrical shock.
As with any electrical appliance, do not operate any PulseBar or ionizer system
in an area where flammable vapors, chemicals, or explosives are present.
IMPORTANT
All Simco equipment and power cords MUST be properly grounded to ensure
proper operation and operator safety.
Prior to installation, insure that any outlets being used to power Simco equipment are correctly polarized
and grounded.
Section 4 Installation
The PFC can simply be placed on a benchtop or mounted vertically to a wall, workbench or machine
using the keyhole slots on the back of the case. The keyhole slots can also be used to secure the PFC to
the workbench top. The feet used on the PFC Controller are made of a durable polyurethane so that they
will not mark benchtops or shed particles in a cleanroom environment.
Figure 1. PFC mounting to wall
The PFC Controller can be attached to almost any surface using a variety of screws and wall anchors. Check your particular
installation to determine the type of fastener you should use.
3