PulseFlow Controller
Installation & Operating Instructions
Section 1 Description
The PulseFlow Controller incorporates both Pulse and Steady State DC technologies and is the power
source for the PulseBar line of products. The PulseFlow controller has four operational ranges from
10hz to 1.0hz in pulse mode and SS for Steady State DC operation. One PulseFlow Controller can
power up to 20 electrode pairs of PulseBar. The compact size of the PulseFlow Controller offers
versatile mounting in almost any application.
Section 2 Specifications
Input Power:
4 watts
Nominal Line Voltage:
100 - 120 / 230 VAC 50/60 Hz.
Output Voltage Range:
3.5 kv. to 8.0 kv. D.C. (Pos. & Neg.)
Output Current Range:
3.0 ua to 7.0 ua D.C.
Cycle
Pulse Rate:
Sw. Pos.
Freq.
Time
10Hz
10Hz
100ms.
2.2Hz
2.2Hz.
450ms.
1.3Hz
1.3Hz
750ms.
1.0Hz
1.0Hz.
1000ms.
SS
0Hz
Steady State (DC)
Temp. Range:
+32ºF to 122ºF (0ºC to +50ºC)
Dimensions:
5.75” x 5.00” x 1.65” (14.60cm x 12.7cm x 4.19cm)
Weight:
20.5 oz (637 gr.)
Emitter Electrodes:
20 pairs (20 Pos. 20 Neg.) maximum.
Fuse:
Two 80 ma. (5x20mm) slo-blow type.
Power Terminal:
Meets FCC part 15J.MP-4 class B
ITE Standard (VDE 0871106.78).
EMI Radiation:
Meets FCC part 15J.MP-4 @ 3 meters.
Section 3 Safety Procedures
CAUTION
The maximum current available at any emitter electrode is less than 100 microamps. A person touching
an electrode may experience a mild nuisance shock.
2
Содержание SIMCO PulseFlow PFC
Страница 9: ...9...
