iLiving ILG8SF10V(APB-10A), Руководство пользователя

Страница: 9 / 10

Excessive noise Bent or damaged
propeller
Loose guard assembly or
motor fasteners.
Fan inoperative
Blown fuse
circuit breaker
Defective motor
Switch in
Insufficient air
flow
Blocked intake or
exhaust opening
Low voltage
Speed control set too low
South San Francisco, CA
Email:
Like us on Facebook: https://www.facebook.com/ilivingusa/
Follow us on Twitter: @iLIVINGUSA
Check out our website: www.ilivingusa.com
Bent or damaged
propeller Replace propeller
Loose guard assembly or
motor fasteners. Tighten as required to 15
20 lbs. per inch.
Blown fuse or open
circuit breaker Replace fuse or reset
circuit breaker
Defective motor Replace motor
Switch in OFF position Turn switch ON
Blocked intake or
exhaust opening Clear intake and exhaust
openings of any
obstructions.
Clean motor, guard,
propeller, and
shutter
assembly. Increase the
opening of the fresh air
intake.
Low voltage Check electrical wiring.
Speed control set too low Increase speed with
controller
iLIVING USA
239 Harbor Way
South San Francisco, CA 94080
Tel: 800-317-1688
Email: service@ilivingusa.com
https://www.facebook.com/ilivingusa/
Follow us on Twitter: @iLIVINGUSA
www.ilivingusa.com
9
Replace propeller
Tighten as required to 15-
Replace fuse or reset
Clear intake and exhaust
motor, guard,
shutter
Increase the
opening of the fresh air
Check electrical wiring.
Increase speed with