iLiving ILG8SF10V(APB-10A), Руководство пользователя

Страница: 2 / 10

PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE
ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE
DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY
INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN
PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR
FUTURE REFERENCE.
BEFORE YOU BEGIN
WARNING!
of parts are to be performed only by
Electrical Requirements:
• The motor amperage and voltage ratings must be
compatibility to supply voltage prior to final
refer to the motor's nameplate label.
Wiring must conform to local
Tools / Materials Needed:
• Mounting Fasteners (8)
• Sealant or Caulk
• Regular Screwdriver Set
Recommended Accessories:
• Speed control for ILG8SF10V(
ILG8SF16V(APB-16A), ILG8SF18V(
ILG8SF24V(APB-24A)
UNPACKING
Contents:
•
Shutter Mounted Exhaust Fan
• Owner’s Manual
Inspect:
• After unpacking fan, carefully inspect
occurred during transit. Check for loose, missing, or damaged parts.
• Check all bolts, screws, set
occurred during transit. Tighten as needed
ensure it turns freely.
• See General Safety Instructions
as shown.
PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE
ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE, OR MAINTAIN THE
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY
INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN
PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR
Installation, troubleshooting, and replacement
are to be performed only by authorized service technicians
• The motor amperage and voltage ratings must be checked for
compatibility to supply voltage prior to final electrical connection. Please
o the motor's nameplate label.
must conform to local, state, and national codes.
Tools / Materials Needed:
Recommended Accessories:
ILG8SF10V(APB-10A), ILG8SF12V(APB-12A
ILG8SF18V(APB-18A), ILG8SF20V(APB
Exhaust Fan
fan, carefully inspect for any damage that may have
occurred during transit. Check for loose, missing, or damaged parts.
• Check all bolts, screws, set-screws, etc. for looseness that may have
Tighten as needed. Rotate propeller by hand to
General Safety Instructions on page 3, and Cautions and Warnings
2
PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE
PRODUCT
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY
INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN
PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR
replacement
authorized service technicians.
checked for
electrical connection. Please
12A),
APB-20A),
for any damage that may have
occurred during transit. Check for loose, missing, or damaged parts.
screws, etc. for looseness that may have
. Rotate propeller by hand to
Cautions and Warnings