iLiving ILG8SF10V(APB-10A), Руководство пользователя

Страница: 8 / 10

ILG8SF30S
(APB-30B) 30” 1/3 3.30
ILG8SF36S
(APB-36B)
36” 1/2 6.00
1. Keep the area free of objects that could impede air flow on both the
intake and exhaust side of fan.
2. For proper exhaust operation, a window, door, or louver should be
opened for fresh air intake on the opposite
ventilated.
3. Turn the fan ON; the shutt
turned OFF, the shutter will close.
4. Speed controllable units are designed to operate at a minimum of fifty
percent line voltage.
1. Disconnect power source before servicing.
2. Periodically clean off accumulated dirt from
and shutter.
Do not depend on any switch as
disconnecting power when installing or
disconnect is not visible,
Failure to do so may result in fatal electrical shock.
Employ proper lock
maintenance.
Symptom Possible Cause(s)
Dry motor bearings
Loose propeller
OPERATING INSTRUCTIONS
TROUBLESHOOTING
MAINTAINANCE
3.30 825 Ball 7.01 5088
6.00 825 Ball 8.24 6128
objects that could impede air flow on both the
intake and exhaust side of fan.
2. For proper exhaust operation, a window, door, or louver should be
opened for fresh air intake on the opposite side of the area to be
the shutter will open automatically. When the unit is
turned OFF, the shutter will close.
4. Speed controllable units are designed to operate at a minimum of fifty
1. Disconnect power source before servicing.
off accumulated dirt from the propeller, guard, motor,
Do not depend on any switch as the sole means of
ecting power when installing or servicing. If power
, utilize OSHA Lock out/Tag out procedure.
Failure to do so may result in fatal electrical shock.
Employ proper lock-out/tag-out procedures when performing
Possible Cause(s) Solution
Dry motor bearings Re-lubricate motor
bearings as per instructions
or replace motor.
Loose propeller Tighten set screws on
propeller hub.
OPERATING INSTRUCTIONS
TROUBLESHOOTING
MAINTAINANCE
8
3432 1552
4380 2620
objects that could impede air flow on both the
2. For proper exhaust operation, a window, door, or louver should be
side of the area to be
er will open automatically. When the unit is
4. Speed controllable units are designed to operate at a minimum of fifty
the propeller, guard, motor,
servicing. If power
utilize OSHA Lock out/Tag out procedure.
out procedures when performing
Solution
lubricate motor
instructions
or replace motor.
Tighten set screws on