![background image](http://html1.mh-extra.com/html/ilive/ilbv94-1/ilbv94-1_instruction-manual_2043468012.webp)
12
Automatic heat-up function
When the automatic heat-up function is activated the wattage of the cooking zone is at 100%
for a certain heat-up time which is dependent on the setting selected (continuous).
At the end of the heat-up time the electronic control switches back to the preselected
simmering setting.
Starting process of the automatic heat-up
- The control is ON and a cooking zone will be selected
- When the power level 9 is reached the automatic heating is activated through a further
press of the slider in correspondence with the maximum value.
- The required power level is selected by means of the slider and the selected value is
shown on the display.
- At this point, you can select the level required for the continuation of the cooking using the
Slider area. The symbol “A” appears 3 seconds after the button is released, alternating
with the continuation level.
- The continuation level can be changed within 15 seconds from activation without disabling
the precooking boost. So, you must select the cooking area and then set the corresponding
cooking area.
- If the selection takes place after 15 seconds:
You can select a higher continuation level; this implies that the precooking time will
automatically be aligned to the currently selected continuation level.
Cooking level
Precooking Boost A [min]
Maximum operating time [h]
0
0
0
u
0
6
1
1
6
2
3
6
3
4,8
5
4
6,5
5
5
8,5
4
6
2,5
1,5
7
3,5
1,5
8
4,5
1,5
9
0,2
1,5
Residual heat indicator
It is meant to indicate to the user that the glass ceramic has a dangerous touch temperature
in the circumference of a cooking zone. The temperature will be determined following a
mathematical model and the remaining residual heat will be indicated by means of “H” on
the corresponding 7-segment display.
Heating up and cooling down will be calculated dependent on
• The selected setting (“0” to “9”)