25
Error code
description
Possible causes
Error recovery
E/3
Unsu
i
table
pot, e.g.
lost of the magnetic
characteristics because
of temperature in the
bottom.
Pot creates on the
modul
e
an improper
operating point which
can destroy devices,
e.g. IGBT.
1. the error is
automaticly cancelled
after 8s and the cooking
zone can be used
again. In case of further
upcoming errors the post
have to be changed.
2. the
modul
e
has to be
changed if the error
comes without an pot on
the cooking zone.
E/4
Unconfigured induction
Any of the following are considered to be abnormal operation and may require servicing:
Yellow tipping of the hob burner flame.
Sooting up of cooking utensils.
Burners not igniting properly.
Burners failing to remain alight.
Burners extinguished by cupboard doors.
Gas valves, which are difficult to turn.
In case the appliance fails to operate correctly, contact the authorised service provider in your area”.
modul
e
answer to UI, but
any element is related
to the effected cooking
zone).
Induction
modul
e
is not
configured.
1.
Delet
e
the hob
configuration and
activate the manual
configuration.
2. Start the UI service
menue to configure the
i
n
duction
modul
e
.
3. If the listed points are
not succesful replace
the
modul
e
.
E/5
No communication
between UI and
induction
modul
e
.
No power supply of
induction
modul
e
Mal
cab
le
or defect
of.
Check power and
lin
e
connections is the
connention ok, replace
the
modul
e
.
E/6
Main power
disturba
n
ce
.
1. Failure in main power
frequency detection.
Check main power
voltage and frequency,
if ok.
Abnormal Operation
Unsustable pot, e.g.