14
DVD
Loading and Playing a DVD
1. With the unit powered ON, set the Source to DVD Mode.
2. Open the disc door and load a DVD into the projector, label side facing up.
3. Close the disc door. The unit will automatically detect the disc and start playing. Use the remote for play
controls, menu navigation, and device options.
Programming a DVD
Note: The procedure for programming CDs, CD+Gs, and DVDs is the same.
1. Press the Prog button on the remote.
2. Use the Arrow/OK buttons to select and add tracks to the program. Up to 16 tracks may be added.
3. When you are ready to play, use the Arrow/OK buttons to select the "Play" symbol in the menu.
4. Press the Prog button at any time to exit and cancel a program.