Select “Off” option for “Video Tampering” will delete the video tampering area.
Note: Only one video tampering area can be set for each camera. The video tampering area cannot be copied. If the schedule is modified, you must reboot NetDVR to
make the parameters to take effect.
5.4.7
Motion Lost Alarm
If this function set to enable, when the camera video is lost, NetDVR can make a video lost warning.
Step 1: Enter into “
Camera Input Adjustment” interface
Step 2:
Use [
Ç
] [
È
] keys to select one camera.
Step 3: Enter into “Video Lost Control” interface
Move highlight item to the list box on the right of “Signal Loss” item, use [
Ç
] key to select “Control” option. Then move highlight item to the “Policy” button on the
right, press [ENTER] to enter into “Video Lost Control” interface:
____________________________________________________________________________________________________________________________________________________________
NetDVR User Manual
[
39
]