Step 2:
Use [
Ç
] [
È
] keys to select one camera.
Step 3:
Select sensitivity level
Use [
Ç
] [
È
] keys to select the sensitivity level for “Video Tampering” item
(Default is OFF). The 3 options are: Low, Normal and High.
Select any one of them to activate “Area Setup” and “Policy Setup” function.
Step 4:
Video tampering area setup
Move highlight item to “Area” button, press [ENTER] key to enter into
area setup interface. The setup method is the same as mask area setup
but only one video tampering area can be set.
Step 5:
Video tampering alarm setup
Move highlight item to “Policy” button,
press [ENTER] key to enter into “Video Tampering Control” menu
Step 6:
Alarm schedule setup
When a video tampering alarm happens,
NetDVR will control the alarm based on the schedule.
You can set 4 periods for each weekly day.
Also you can copy the schedule of one day to other days.
Notes: Time periods cannot be repeated in one day. Please reboot NetDVR to make the parameters to take effect.
Step 7:
Setup alarm policy
If a video tampering alarm happens in schedule, NetDVR will respond based on the policy. You can select single or multiple responses including “On Screen Warning”,
“Audible Warning”, “Upload to Center” and “Trigger Alarm Output”. Use [
Ç
] [
È
] and [EDIT] key to enable or disable them.
Step 8:
Save alarm setup
After finish setup, press “Confirm” button to return to “Camera Input Adjustment” interface. In “Camera Input Adjustment” interface, press “Confirm” button to save
current camera parameters then return to main menu.
Step 9:
Save all cameras
If you want to setup other cameras, please repeat step 2 to step 8. In “Image Setup” menu, press “Confirm” key to save all cameras parameters. Press “Cancel” button
or [ESC] key to abort.
____________________________________________________________________________________________________________________________________________________________
NetDVR User Manual
[
38
]