Playback the video segment
You can use our free player software to playback the video segment in PC. You can find the player software in the software CD.
4.8
Voice Talk
Initiative remote chat [VoIP] is not available. But passive VoIP is possible. You can use Live Center or CMS software to initiate remote chat with NetDVR.
4.9
Auxiliary Video Output
Press [MAIN/AUX] key, you can switch any channel live video input to the auxiliary video output. To utilize this feature you must set camera Layout channel in the
Preview menu.
Step 1: Press [MAIN/AUX] to enter into video matrix control mode.
Step 2: Select video input channel.
Press two numeric keys to select video input channel (01-16), the corresponding channel video will be displayed on that auxiliary
video output. You can press other two numeric keys to output the corresponding channel video.
Step 3: Define other auxiliary video output.
Repeat above steps.
Step 4: Exit matrix control mode.
Press [ESC] key.
For example: Press [MAIN/AUX] to enter into video matrix control mode, press [0] [1], then the video of 1
st
channel will be displayed on that 1
st
auxiliary output. If
you press [1] [5] numeric key, the video of 15
th
channel will be displayed on the auxiliary output. Press [ESC] to exit matrix control mode.
4.10
Shut Down NetDVR
Note: Do not switch off the power directly in case of damaging HDD. The correct step is using “Power Off” in the “Utilities” menu, or
[POWER]
key on the
front panel or on IR controller to shut down NetDVR normally
Use menu
Enter into “Utilities” submenu, move highlight item to “Power Off” icon and enter into power off dialog, press “Confirm” to shut down the NetDVR.
____________________________________________________________________________________________________________________________________________________________
NetDVR User Manual
[
27
]