Press numeric keys to switch individual camera preview. If NetDVR has less than 10 channels, press one numeric key to switch corresponding channel. For example
pressing [4] key to preview 4
th
camera. If NetDVR has 10 or more channels, press two numeric keys to switch corresponding channel. For example, press [0] [4] to
preview 4
th
camera, and press [1] [2] keys to preview 12
th
camera.
Press [EDIT] key to manual cycle preview. You can set the auto preview mode in “Preview” menu, refer to 5.11.
Press [PREV] key to switch multi-channels preview.
4.3
User Name and Password
Note: When NetDVR is delivered from factory, there is only one default administrator named “admin” setup, its default password is “12345”. This administrator name
cannot be modified but its password can be modified. You can create 15 users and define their user rights.
Highlight item is current active item. Use [
Ç
] or [
È
] keys to change current selection.
Use [
Æ
] keys to move highlight item forwardly. Use [
Å
] keys to move highlight item backwardly.
Login dialog is following:
Use [
Ç
] / [
È
] keys to select one user, press [
Æ
] key to enter into “Password” input box. Inputs corresponding password then press [ENTER] key to exit. The highlight
item will move to “Confirm”. Pressing [ENTER] key to finish dialog. If the NetDVR sound a beep, it means the user name and/or password is not matched. After three
times beep, NetDVR will return to preview mode.
Change password
For those users created by admin, they can change their password as following:
If you login as other user ID the “User” icon will display as “Password” icon.
____________________________________________________________________________________________________________________________________________________________
NetDVR User Manual
[
18
]
