Ikra IBRM 40-D98, Перевод оригинальной инструкции

Страница: 28 / 40

26
FAILURE REMOVAL
Defect
Cause Removal
Engine does not start or
starts, but does not run
further.
Wrong starting process. Refer to the instructions in these operating
instructions.
Empty fuel tank/Lack of fuel Add some fuel
Wrong fuel, storing without petrol tank
being drained
Drain the fuel tank and carburettor. Add
fresh petrol.
Wrong setting of the carburettor. Have the carburettor settings adjusted by
an authorised customer service organisa-
tion.
Sooted spark plug (carbon residues on elec-
trodes), electrodes distance too big.
Clean the spark plug, check the plug thermal
value, possibly change the plug.
The spark plug is wet from petrol (oversatu-
rated engine).
Dry the spark plug out and refit it.
Dirty air filter Clean or replace the air filter
Engine starts, but does
not run at full power.
Dirty air filter Clean or replace the air filter
Wrong setting of the carburettor. Have the carburettor settings adjusted by
an authorised customer service organisa-
tion.
Engine splutters. Dirty air filter Clean or replace the air filter
The motor does not de-
velop maximum power
Engine does not run
smoothly.
Wrong setting of the carburettor. Have the carburettor settings adjusted by
an authorised customer service organisa-
tion.
Excessive exhaust gases
(smoke).
Unsteady running,
strong vibrations
Blade is damaged Replace the blade
Blade is loose Check and tighten the blade clamping
Poor mowing/catching
performance
Blade is blunt Have the blade sharpened or replaced
Collection bag is blocked Empty the collection bag
Mowing height adjustment not regulated Adjust the mowing height
Grass is not collected Blocked channel Clean the ejection channel
Full collection bag Empty the collection bag
Too wet grass Cut in dry weather
EN
ENGLISH