Ikon ISP18 Скачать руководство пользователя страница 12

12

Limited Warranty

IKON warrants to the original purchaser of new equipment that said equipment, when installed in accordance with

our instructions within North America and subjected to normal use, is free from defects in material or workmanship

for a period of 1 year. The labor warranty is one year from original installation

or 18 months from actual factory shipment date whichever date occurs first. Warranty includes onsite service

calls within 60 miles of an authorized service company. End user is responsible for all extra travel and mileage at

prevailing rates.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED. IKON

EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR EXPRESSED OR IMPLIED

WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

IKON ’S OBLIGATION AND LIABILITY UNDER THIS WARRANTY IS EXPRESSLY LIMITED TO REPAIRING AND

REPLACING EQUIPMENT WHICH PROVES TO BE DEFECTIVE IN MATERIAL OR WORKMANSHIP WITHIN

THE APPLICABLE WARRANTY PERIOD. All repairs pursuant to this Warranty will be performed by an Authorized

Designated IKON Service Location during normal working hours. This warranty does not cover services performed

at overtime or premium labor rates. End user is responsible for the difference between normal service rates and

premium service rates. IN NO EVENT SHALL IKON BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES TO BUYER OR ANY THIRD PARTY, INCLUDING, WITHOUT LIMITATION, LOSS OF PROPERTY,

PERSONAL INJURY, LOSS OF BUSINESS OR PROFITS OR OTHER ECONOMIC LOSSES, OR STATUTORY

OR EXEMPLARY DAMAGES, WHETHER IN NEGLIGENCE, WARRANTY, STRICT LIABILITY, OR OTHERWISE.

This warranty is given only to the first purchaser from a retail dealer. No warranty is given to subsequent transferees.

Warranty does not cover product failures caused by: failure to maintain, neglect, abuse, damage due to excess

water, fire, normal wear, improper set up and use. Periodic maintenance is not covered.

This warranty is not in force until such time as a properly completed and signed installation/warranty registration or

an online registration form has been received by IKON within 30 days from the date of installation.

Proof of purchase is required to extend warranty more than 1 year from date of shipment from the factory

.

THE FOREGOING WARRANTY PROVISIONS ARE A COMPLETE AND EXCLUSIVE STATEMENT BETWEEN

THE BUYER AND SELLER. IKON NEITHER ASSUMES NOR AUTHORIZES ANY PERSONS TO ASSUME FOR

IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH SAID EQUIPMENT.

Example of items not covered under warranty, but not limited to just these items:

1

Acts of God, fire, water damage, burglary, accident, theft.

2

Freight damage.

3

Improper installation or alteration of equipment.

4

Use of generic or after-market parts.

5

Repairs made by anyone other than a IKON designated servicer.

6

Lubrication.

7

Expendable wear parts, adjustable feet, blown fuses, lamps, etc.

8

Cleaning of equipment.

9

Misuse or abuse.

Содержание ISP18













Отзывы: