IKL GULIVER TERMO, Руководство пользователя

Страница: 16 / 21

the glass on the hearth door and for better combustion. During the stove operation, the
movable part of the regulator is heated, so use the additional equipment during regulation.
7. CLEANING THE STOVE
We recommend removing the ash produced every day. Never allow the ash accumulate
to the point where it touches the grate; this would obstruct the circulation of primary air and
slowly suffocate the fire.
When cleaning the outside surfaces of the stove, avoid abrasive products which would
damage the protective paint. Do not use chemicals that contain diluents, because the cast
parts are protected by heat resistant paint.
Panoramic door glass should be cleaned with normal detergent and exclusively after getting
cold. Do not use abrasive products because you will damage the glass surface. After
cleaning, rinse with pure water and dry.
The additional equipment that is delivered with the stove is the glove and equipment for
shaking of embers and removal of ashtray (picture13).
Picture 13 Picture 14
Clean channel for the flow of gaseous combustion products under the oven made as
follows: Remove the decorative panel (below the oven door) by tightening the screws
(Slika.14). Stump removed layers of soot from the bottom of the stove and below the
bottom of the oven. After cleaning, return the decorative plate and screws to attach.
8. CONSUMABLES
The following are considered consumables and therefore not covered by the warranty:
all gaskets, glass parts, the paints, the ceramics and the parts with chemical coating
(chrome, nickel, zinc parts). The warranty does not cover damages caused by improper
installation, incorrect connection not in compliance with the instructions which accompany the
product, or by tempering by unqualified or unauthorized personnel.