IKL GULIVER TERMO, Руководство пользователя

Страница: 15 / 21

Regulation of the draft
Picture 9
Combustion rate and thus the amount of heat
which gives the stove, depends on the amount of
combustion air that is brought into the space
below grill. Regulation of the amount of air is
achieved automatically through the controller of
draft Rathgeber placed on the back of the stove
(Picture 9), or manually, by turning of the button on
the stove frame connected with the draft regulator
(Picture 1 position 28).
Button turns with extra accessories and has two extreme positions:
1. Turning to the final position in the direction shown in
picture.10. gives a maximum draft;
Right cooker stove Left
cooker stove Picture 10
Close Close
Picture 11
2. Turning to the end position opposite of the
direction shown in picture.10, gives a minimum draft;
Primary air regulator (position.20) is set in the
closed position and it should be kept in this position at
all times of work of the stove. When closed, the
regulator prevents air intake from the front side below
the the grille, which automatically regulates the intensity
of burning by draft regulator, located on the back side
of the stove. If for some reason burning is difficult, due
to weather conditions or high humidity fuels (wood,
coal), the controller of the primary air can
open(Picture.11).
NOTE: If the primary air regulator is open, the air flow is steady, so that can lead
to the overheat the water in the system.
Regulation of the secondary air
The secondary air regulator should be put in
Close
Open
Picture 12
the position closed during ignition and held in that
position until you establish the operation heating regime.
After that, put theregulator into the position opened and
hold it in that position during the stove is in operation. The
secondary air is used to clean