IKH XW011, Инструкция по эксплуатации

Страница: 37 / 40

37
- Place the workpiece lengthwise against the guide profile (53).
- Switch on the machine.
- Securely hold the workpiece and guide it along the saw blade keeping it pressed against the
guide fence.
- Switch the machine off as soon as the cut is completed.
Sawing mitre cuts (Fig. H)
While sawing mitre cuts, the workpiece is placed against the guide fence and sawn through trans-
versely at an angle.
-
Set the guide fence (7) for sawing mitre cuts.
- Proceed as described for sawing straight cross-cuts, starting in point 2.
Sawing bevel cuts (Fig. H, J, K and L)
While sawing bevel cuts, the workpiece is sawn through at an inclination. A bevel cut is combined
with either ripping or sawing straight cross-cuts.
For sawing bevel cuts combined with ripping, proceed as follows:
-
Set the guide fence (6) and guide profile (55). Set the bevel angle.
- Proceed as described for ripping, starting in point 2.
For sawing bevel cuts combined with sawing straight cross-cuts, proceed as follows:
-
Set the guide fence (7) for sawing straight cross-cuts and set the bevel angle.
- Proceed as described for sawing straight cross-cuts, starting in point 2.
Sawing compound mitre cuts (Fig. H, K and L)
While sawing compound mitre cuts, the workpiece is placed against the guide fence and sawn
through in a combined mitre and bevel cut.
-
Set the guide fence (7) for sawing mitre cuts and set the bevel angle.
- Proceed as described for sawing straight cross-cuts, starting in point 2.
Lubrication (Fig. M)
- From time to time, apply a drop of oil to the thread of the locknut (64).
CLEANING AND MAINTENANCE
The machine does not require any special maintenance.
-
Regularly clean the ventilation slots.
- Remove all dust from the housing.
- Regularly check the machine for possible damages.
- Before use always check the state of the saw blade. Particularly make sure that the saw blade is
fastened firmly and that there is no play on it.
- Before use always check the distance between the riving knife and saw blade and between guard
and saw blade.