SETUP GUIDE
Congratulations on your purchase of the iKey Audio iConnex soundcard.
This guide will help you setup the iConnex soundcard as well as the included
Audacity software. Please take the time to carefully read through this guide
as it will help you better understand how to use your new iConnex soundcard.
COMPUTER HOOK UP:
First you should connect your iConnex to
your laptop or desktop computer using the
USB cable that came in the iConnex
package, making sure to connect the
smaller SQUARE end of the USB cable to
the iConnex. Then connect the other larger
FLAT end to the USB port on the back, side
or front of your desktop or laptop computer.
INPUTS:
The iConnex can be connected to most of
your Tape, Phonograph (Turntable), and
Stereo receivers as long as they have a
phono or line level TAPE/RECORD output,
these INPUTS are divided into two sperate
types and both accept standard RCA type
cables (not included).
INPUT (LINE):
The line level input accepts any line level
source such as CASSETTE TAPE PLAYER,
DJ MIXER, CD PLAYER or even an all in
one stereo system that has a RECORD
output. You may use a
standard pair of RCA type
cables to connect your
stereo/mixer/tape player to
the iConnex line input.
If your record player is attached to a
whole stereo system you must make
sure that the system has a RECORD,
TAPE or LINE output making sure to
connect this output using the LINE
input as described above.
STEP 1 CONNECTIONS:
OR
USB cable
Included
DO NOT CONNECT A LINE LEVEL OUTPUT TO THE PHONO INPUT AS WELL AS NEVER
CONNECT A SPEAKER OUTPUT TO ANY INPUT AS IT MAY DAMAGE THE ICONNEX.
WARNING!
