Ikegami OCP-10, Руководство по эксплуатации

Страница: 51 / 63

35
8. Troubleshooting
8.1 Blinking ALARM Indicator
The BS/CCU has a self-diagnosis function that can monitor abnormal condition in the
BS/CCU itself and in the camera. This function starts working at the same time the BS/CCU
MAIN POWER switch is turned on. It continues working all the time during operation.
When any abnormal condition occurs in the BS/CCU or the camera, the function
immediately detects the condition and starts blinking the ALARM indicator on the
OCP. In addition, the function indicates the self-diagnosis information indication
screen on the PM to specify the troubled section.
When the PM IND/PAGE switch of the OCP is pressed even when the ALARM indicator is
not blinking, the self-diagnosis information screen is indicated on PM for checking the status.
Reference
: The PM IND/PAGE switch becomes operable by allocating the
function to the F. switch. Refer to "4. F. Switch" for the allocation
method.
8.2 Adjustment of IRIS Friction
The OCP-10 has an adjustment for joystick iris friction. Friction can be adjusted
by inserting a hexagon wrench through the side plate and turning
clockwise/counterclockwise (effective only with JS TYPE). Turning clockwise will
increase the friction, and turning counterclockwise will decrease the friction.
Friction adjusting hole
Turning clockwise:
Increases the friction.
Turning counterclockwise:
Decreases the friction.