background image

2

1-2. Disclaimer

(1) This equipment is used to take images as a surveillance camera. It is not to

be used for the purpose of crime prevention.

(2) Ikegami assumes no responsibility for the following matters.

 System impediment, malfunction or breakdown as a result of connecting

with equipment from other companies.

 Accidents or breakdowns due to mistaken usage or negligence.

Disassembly or repair of equipment that is not recognized by Ikegami.

Improper use by a third party of the surveillance images produced by this
equipment, or damages resulting from such use.

Loss of the setting contents.

In addition, all damages resulting directly or indirectly in connection with
this device.

(3) SD Card

• Please be aware that this company assumes no responsibility regarding

guarantees in cases where images were not recorded due to problems
with this device or the SD card.

• The following cases may involve destruction (loss) of recorded data. Please

be aware that this company cannot assume any responsibility regarding
damages due to destruction of data.

• Mistaken usage method of SD card.
• If the SD card was not correctly inserted in the device.
• If the SD card has undergone electrical or mechanical shock or force.
• If the SD card was removed or the device power was turned off during

access to the SD card.

1-3. Protection of personal information

If it is possible to identify individuals with the image information obtained with
this device, this amounts to personal information as determined in the Act on
the Protection of Personal Information. Image information of this sort should be
handled properly in accordance with the law.

The contents of information recorded on the SD memory card used with this
device may correspond in some cases to private information. If this device is
given to a third party due to disposal, transfer or repairs, please be especially
careful about handling.

Содержание IPD-DM100 Series











































Отзывы: