15
Step 1: When using the trimmed ring, use the screws to attach the trimmed ring
attachment fixtures (2) to the main unit.
Step 2: Follow the same procedure as in steps 1-6 in Section 5-3 (Attachment
method when not using trimmed ring) to attach the camera main unit to
the attachment fixture.
Step 3: Rotate the trimmed rings so that slit B on the trimmed ring attachment
fixture and slit B’ on the trimmed ring match and then secure.
Step 4: After completing lens adjustment and user setup, follow the steps in
Section 5-2 (Attaching the dome cover) to attach the dome cover.
Notes
1 ) After installation, turn the dome cover and the trimmed ring in a
clockwise direction and confirm that they are securely attached.
2 ) When pulling the cable from the side of the trimmed ringg, first
remove section C for use.
