Ikegami HTM-1990R M страница 22 Скачать руководство пользователя

Страница: 22 / 54

①

Infrared sensor

Infrared sensor for the optional wireless remote controller

RCT-30A

②

NO BURST LED

LED which operates only when the composite signal input is selected.

The LED lights up when the selected composite signal has no burst (black and white

signal) or when the color killer circuit is activated.

③

OVERLOAD LED

This LED lights up when the ABL circuit is activated (the luminance is higher than

necessary).

Using the monitor in a way which causes this LED to light up continuously for a long

time will deteriorate the CRT. Therefore use the monitor with the luminance lowered.

④

DEGAUSS switch

When the power is turned ON, CRT demagnetization will be performed automatically.

This switch allows demagnetization to be performed at one-touch.

As pressing this switch continuously has no effect, release and press again 2 to 3

minutes later.

⑤

POWER switch, LED

Switch for turning the monitor power ON/OFF. The LED is ON when the power is turned ON.

Always turn ON the

MAIN POWER switch

on the rear panel when starting the monitor.

Normally turn ON/OFF using this switch.

WARNING

POWER

DEGAUSS

OVER LOAD

NO BURST

⑤

④

②

③

①

4. User Adjustment

4-1. Power Supply

FUSE

6.25A250V

AC IN

AC100-120V

MAIN

POWER

①

FUSE

Fuse for preventing over-current.

When the fuse is blown, replace it with a rated 6.25A (250V) slow-blow fuse after

eliminating the cause.

②

MAIN POWER switch

To operate the monitor, turn ON this MAIN POWER switch as well as the POWER

witch on the front panel.

③

AC power input

Insert the provided AC cable here to supply AC power.

④

Lock

After inserting the AC plug, lock the AC plug with this lock to prevent it from disconnecting.

Fig. 4-1.

POWER Section on Rear Panel

4-2. Names and Functions of Front Left Panel Parts

Fig. 4-2 Front Left Panel

Содержание HTM-1990R M























































Результаты поиска

Содержание HTM-1990R M

Отзывы:

Похожие инструкции для HTM-1990R M

Бренды по названию

Популярные бренды

Ikegami HTM-1990R M, Руководство по эксплуатации

Результаты поиска

Содержание HTM-1990R M

Отзывы:

Похожие инструкции для HTM-1990R M

Бренды по названию

Популярные бренды