Ikegami HDL-45E, Руководство по эксплуатации

Страница: 68 / 84

5 - 40 5. OPERATION
Notice
T Y P E 1 o r T Y P E 2 i s r e c o m m e n d e d f o r t h e o p e r a t i o n a s t h e
information camera, and TYPE3 or TYPE4 is recommended for the
operation as the surveillance purpose.
① When [AVC MODE] is selected, the menu is displayed as shown below.
AVC SETUP
QUIT
AVC DISPLAY MODE
OFF
PRESET DAY FILE MODE2
DAY FILE CENTER MODE3
PRESET NIGHT FILE MODE2
DAY DETECT AREA AREA4
NIGHT DETECT AREA AREA4
GAIN LIMIT +18dB
(ON, OFF)
(MODE1 to MODE5)
(MODE1 to MODE5)
(MODE1 to MODE5)
(AREA1 to AREA7)
(AREA1 to AREA5)
(+12dB to +54dB)
• AVC DISPLAY
Performs the character display at the AVC operated condition to the main line.
4A F10.0 D A 0dB N2 D3
Display items from the left:
・
ND FILTER No.
・ CC FILTER No.
・
IRIS F value
・ Present condition “D” → DAY MODE , “N” → NIGHT MODE
・
AWB file (“A”ch/“B”ch/A“T”W coupled)
・ Gain display
・
Output No. of NIGHT MODE
・ Output No. of DAY MODE
• PRESET DAY FILE
Enables to output 5 patterns of convergence value of the lens IRIS in the DAY MODE operation.
Preset value can be set by determining the selected MODE.
* When the remote controller is connected and the AUTO IRIS is turned off, the convergence value of the IRIS uses the
volume of IRIS CONTROL. MODE1 is output for the direction that the volume becomes minimum, and MODE5 is
output for the direction that the volume becomes maximum. When the AUTO IRIS is turned on, the MODE of the preset
value by PRESET DAY FILE is output regardless of the angle of the tab. The convergence value of the image
approximately becomes the following value on the basis of MODE3.
MODE1 : -10%
MODE2 : -5%
MODE3 : Standard value
MODE4 : +10%
MODE5 : +20%