Ikegami HDL-4500, Руководство по эксплуатации

Страница: 56 / 70

①
When [AVC MODE] is selected, the menu is displayed as shown below.
・ AVC DISPLAY
Performs the character display at the AVC operated condition to the main line.
Display items from the left :
・ ND FILTER No .
・ CC FILTER No .
・ IRIS F value
・ Present condition “D” → DAY MODE, “N” → NIGHT MODE
・ AWB file (“A”ch/“B”ch/A“T”W coupled)
・ Gain display
・ Output No . of NIGHT MODE
・ Output No . of DAY MODE
・ PRESET DAY FILE
Enables to output 5 patterns of convergence value of the lens IRIS in the DAY MODE operation.
Preset value can be set by determining the selected MODE.
* When the operation control panel is connected and the AUTO IRIS is turned off, the convergence value of the IRIS uses the
volume of IRIS CONTROL. MODE1 is output for the direction that the volume becomes minimum, and MODE5 is output for
the direction that the volume becomes maximum. When the AUTO IRIS is turned on, the MODE of the preset value by PRESET
DAY FILE is output regardless of the angle of the tab. The convergence value of the image approximately becomes the following
value on the basis of MODE3.
MODE1 : -10%
MODE2 : -5%
MODE3 : Standard value
MODE4 : +10%
MODE5 : +20%
・ DAY FILE CENTER
Fixes the preset MODE to the center position of the IRIS control volume on the operation control panel panel.
When other than MODE3 is fixed to the center position, it performs one-sided operation .
e . g . When MODE2 is fixed to the center position, MODE5 cannot be fixed .
AVC SETUP
QUIT
AVC DISPLAY MODE
OFF
PRESET DAY FILE MODE2
DAY FILE CENTER MODE3
PRESET NIGHT FILE MODE2
DAY DETECT AREA AREA4
NIGHT DETECT AREA AREA4
GAIN LIMIT +18dB
（ ON, OFF ）
（ MODE1 〜 MODE5 ）
（ MODE1 〜 MODE5 ）
（
MODE1
〜
MODE5
）
（ AREA1 〜 AREA7 ）
（
AREA1
〜
AREA5
）
（ +12dB 〜 +78dB ）
4A F10.0 D A 0dB N2 D3
5 . OPERATION 5-31