Ikegami HDL-4500, Руководство по эксплуатации

Страница: 50 / 70

[WORKING TIME]
Displays accumulated operation time since the shipment.
[SUB TIME]
Displays the accumulated operation time of the camera. Unlike “WORKING TIME”, this can be reset by a user.
1 .
Select “SUB TIME” and press the MENU switch. The blinking cursor moves to the mode.
2 .
Select “RESET” and press the MENU switch. The operation time is reset to “0.0H”.
■ VERSION
MPU ROM : Displays the ROM version inside the MPU module .
CHECK SUM : Displays the check sum of the ROM data .
V EFFECT : Displays the ROM version of the FPGA in the V EFFECT module of the CCU .
In changing the ROM version, verify that the checksum separately informed and the one displayed
on the menu screen match .
SENSOR PROC : Displays the FPGA version .
C PULSE : Displays the FPGA version .
5.4 Engineer Menu
The camera provides engineer menus for maintenance in addition to the camera menus.
New engineer menus ENGINEER PAGE1, ENGINEER PAGE2, ENGINEER PAGE3, and ENGINEER PAGE4 are displayed in
this order after camera menu MENU PAGE5.
As some items set on engineer menus affect the main video signal and operation, be extremely careful when setting
engineer menu items . Especially, it is not recommended to operate the engineer menu while the camera is on air .
MPU ROM / FPGA VERSION
MPU ROM STR-5676V03.00.00
CHECK SUM(F1B2)
VEFFECT STR-5290V03
SENSOR PROC
STR-5714V09
C PULSE STR-5718V03
5 . OPERATION 5-25