Ikegami Editcam 3 DNS-33W, Руководство по эксплуатации, Страница: 85 / 160

DNS-33W 0503 VOL1 (E) DNS-33W
5. SETTINGS AND ADJUSTMENT OF CAMERA 5 - 11
4. Display the desired function and press the SET button
while the selection is flashing. The selected function is
allocated to the P.FUNC switch (IRIS+CORR for the
figure below).
P.FUNC SW ENTRY
IRIS+ CORR
The procedures above allocate functions to the P.FUNC
switch. Pressing the P.FUNC switch turns the allocated
function ON, and pressing it again turns the function OFF.
5.8.2 Allocating Skin DTL Function to P.FUNC
The Skin DTL function can be allocated to the P.FUNC
switch.
1. After allocating functions to the P.FUNC switch, pressing
the P.FUNC switch turns the Skin DTL function ON. The
color range to apply the Skin DTL function must be
decided in advance, using Auto Hue Detect (AHD).
2. Pressing the P.FUNC switch again turns the Skin DTL
function OFF. The camera returns to the normal DTL
setting.
5.8.3 Allocating AHD to P.FUNC
The Auto Hue Detect (AHD) can be allocated to the P.FUNC
switch.
1.
Press the P.FUNC button. A white square window
appears in the middle of the VF.
The white square for the AHD disappears if no operation
is carried out in 10 seconds, and the AHD function is
also cancelled.
A White Square Window
2. Adjust the camera position so that the part to apply the
Skin DTL function comes in the middle of the white
square window.
3. Press the P.FUNC switch again. AHD is executed,
"A.SKIN HUE OK" is displayed in the VF, and the color
to apply the Skin DTL function is replaced by the zebra
indicator.
A. SKIN HUE
OK
Zebra Indicator
4. If the color to apply the Skin DTL function is not
replaced by the zebra indicator, or the zebra indicator is
applied to other colors/parts as well, repeat step 1 to 3
again to display zebra indicator for only the applicable
subject.
Reference
For details on the Skin DTL, refer to "5.5 Screen
Detail Enhancement (DTL)", "5.5.1 Skin DTL".
5.9 I n i t i a l i z i n g V a r i o u s C a m e r a
Settings
The level adjustments and settings changed from the menu
can be returned (initialized) to the factory settings. This
section explains how to initialize various camera settings.
MIC IN
PRESET
AB12
P48
OFF
ATT
-20dB
OFF
POWER
MAINTE
MIC IN
PRESET
AB12
P48
OFF
ATT
-20dB
OFF
POWER
Camera Left Side
PRESET Button