Ikegami Editcam 3 DNS-33W, Руководство по эксплуатации

Страница: 68 / 160

DNS-33W DNS-33W 0503 VOL1 (E)
4 - 8 4. OPERATION
3. Push the FieldPak holder cover to close.
4.8.2 FieldPak Replacement
1. Press the EJECT key to open the FieldPak holder.
2. Take out the FP2 from the FieldPak holder.
Push the FieldPak holder cover to close.
4.9 Operations of Recorder Section
This section explains the basic operations of the recorder
section.
4.9.1 Clip Recording
Recorded images and sound data are called "clips". This
section explains how to record a clip onto an FP2.
1. Open the FieldPak holder by pressing the EJECT key on
the top of the camera.
2. Place an FP2 in the FieldPak holder, and push the holder
cover into the camera body.
Notice
Be sure to use a formatted FP2. For how to format
the FP2, refer to "6.3.1 FMT Menu".
3. Select the output signal of the camera for "SWITCHER"
of "AUDIO/VIDEO" in the menu of the recorder section.
Selection Mode Output Signal
CAMERA
Output signal of the camera
EXTERNAL
External input signal
DISK
Video signal already recorded on the FP2
4. Select the audio input using the AUDIO INPUT switch
on the control switch panel.
5. Set the FIELDPAK switch on the right side of the camera
to "STBY".
TCG
PANEL
LIGHT
DNS-
33W
POWER
VF
CHARA
AUDIO
FIELDPAK GAIN OUTPUT AWB
STBY
SAVE
・ L
・
M
・ H
CAM
BARS
・ A
・ B
OFF
POWER
VF
CHARA
Set FIELDPAK switch to "STBY"
Camera Right Side
6. Select a bin in which to store the clip recorded. Press the
SHIFT+PRIOR key or SHIFT+NEXT key to switch to the
prior or next bin. You can also use the "BIN" menu of
the recorder section to select the desired bin. Refer to
"6.3.2 BIN Menu" for how to create a new bin and how
to select a bin on the "BIN" menu.
Notice
• Bin is a location where a set of related clips is
stored. A bin can be newly created in the FP2,
and any bin to be used can be selected. The
newly created clip will be recorded in the bin
selected at the time.
• You cannot record to the OUTTAKES bin or the
ORPHANS bin. The unit will record to the last
accessed bin if the REC button is pressed while
displaying OUTTAKES or ORPHANS bin material.