Ikegami CCU-890, Руководство по эксплуатации

Страница: 59 / 132

4.4 System Setup Diagram
CCU-890 0804 VER2 (U) (E)
45
䂓
Network Operation
CPH-200
O C P - 2 0 0 O C P - 2 0 0 O C P - 2 0 0
PM
WFM
PM
WFM
OCP-200
MCP-200
CSU-110
PM
WFM
CCU-890
*1
CPH-200
MIC-1
MIC-2
Headset
(ENG/PROD)
Headset
(ENG/PROD)
HDK-79EX
Ⅲ
Camer
a Cab
le Max.
3000m
*2
Coaxial Cable
(Network command)
*2
CP Cable
(Network command)
MCP Cable
DC IN
*3
*1 The CCU-890 can be operated when the network ID of the rotary switch on the PULSE module on the front of the CCU
corresponds to the CCU No. set by an OPC or MCP.
*2 For the maximum and minimum extension length of the cables, refer to "BSH-200/CPH-200 Setup Manual."
*3 For network operation, commands can be selected from an OCP, MCP, or CPH. For video signals, the operating confi guration to
select the signals from the CSU-110 is also accepted.
However, an external power supply (DC voltage) is required when the MCP-200 is used and the extension length of the cables is
long.