Ikegami CCU-890, Руководство по эксплуатации, Страница: 32 / 132

2.2 CCU-890 Rear View
18
CCU-890 0804 VER2 (U) (E)
⑥ TALLY IN connector
Inputs TALLY control signals from the external system.
The TALLY mode is selected by the switch on the AUX-A module. Refer to "5.2 Settings Using Switches on the Module," "TALLY
Mode Settings" (page
94) for how to select the mode.
Indicator
Tally Call
Camera CCU Control Panel
R G R G R G
System
R 䂾 䂾 䂾
G
䂾 䂾 䂾
Camera Head * 䂾 䂾
CCU *
䂾 䂾
Control Panel * 䂾 䂾
* The indicator lights when the CALL switch on the camera head, CCU, or control panel is pressed.
( 䂾 : ON)
⑦ AUX connector
Connector to control external equipment. This connector is used for a special specifi cation (optional).
⑧ RS422 TRUNK connector (option)
Connector for RS-422 communication.
⑨ WFM REMOTE connector
Outputs stair signals for the waveform monitor (WFM). By connecting the WFM for NTSC to this connector, the R, G, and B
waveforms can be monitored simultaneously (parade display).
⑩ SCAN CONT connector
Inputs control signals to control the aspect ratio of SDTV output from the external system.
⑪
DIGITAL AUDIO connector
Outputs digital audio signals (75
Ω
output). The signal conforms to the AES/EBU format.
⑫ INTERCOM connector
Connector to connect to the external intercom system.
"24-pin type" or "BTA S-1005B compliant (19-pin) type" are optionally available for the INTERCOM connector.
* "19-pin type" is optional. (The connector is not RoHS-compliant.)
⑬ AUDIO TRUNK connector
Input connector for the trunk line for audio signals to be transmitted to the camera head.
⑭ MIC OUT connectors
Output the audio signals that are input to the MIC IN connectors on the camera head. (2 channels)
⑮ AC INPUT connector
Supplies AC voltage to the CCU.