Ikegami CCU-890, Руководство по эксплуатации, Страница: 108 / 132

5.1 Settings from the CCU Menu
94
CCU-890 0804 VER2 (U) (E)
Setting Item Set Value Description
ANALOG OUT SEL GBR Sets the analog component output to "HDTV GBR."(In this case, the output is fi xed to LINK A.)
YPbPr Sets the analog component output to "HDTV YPbPr."(In this case, the output is fi xed to
LINK A.)
ANALOG HDTV FMT OUT1 Sets the analog component output format to the same format as HD-SDI PM output1.
OUT2 Sets the analog component output format to the same format as HD-SDI PM output2.
ANALOG SYNC ADD (GBR
selected) OFF Sets not to add tri-sync signals to all the analog HDTV RGB output.
ON Sets to add tri-sync signals to all the analog HDTV RGB output.
(YPbPr
selected) Y ONLY Sets to add tri-sync signals only to the Y signal among the analog HDTV YPbPr output.
ALL Sets to add tri-sync signals to all the analog HDTV YPbPr output.
SYNC OUT SEL
*1
1080I59. The synchronization signal for the external synchronization output associates with the
"1080I59.94" format.
1080P23.SF The synchronization signal for the external synchronization output associates with the
"1080P23.97 segmented frame" format.
1080P23. The synchronization signal for the external synchronization output associates with the
"1080P23.97" format.
720P59. The synchronization signal for the external synchronization output associates with the
"720P59.94" format.
SYNC OUT H PHASE
*2
Adjusts the horizontal phase of external synchronization output.
SYNC OUT V PHASE
*2
Adjusts the vertical phase of external synchronization output.
SYNC 2-3ID ADD
*3
OFF Sets not to embed pulse signals, which counted 1 to 5 frames, in the SYNC output.
ON Sets to embed pulse signals, which counted 1 to 5 frames, in the SYNC output.
WFM OUT1 LINK A Sets the HD-SDI signal of the WFM output (fi rst channel) to "LINK A."
LINK B Sets the HD-SDI signal of the WFM output (fi rst channel) to "LINK B."
WFM OUT2 LINK A Sets the HD-SDI signal of the WFM output (second channel) to "LINK A."
LINK B Sets the HD-SDI signal of the WFM output (second channel) to "LINK B."
*1 Depending on the setting of "OUT1 FORMAT"/"OUT2 FORMAT" in "HDTV CONT (1/2)," the format to be selected as a
synchronization signal varies.
OUT1/OUT2 FORMAT Synchronization Signal Format to be Selected
1080I59. 1080I59.
1080P59. 1080I59.
1080I119. 1080I59.
1080I59.PD
1080I59. / 1080P23.SF / 1080P23. 1080P23.SF
1080P23.
720P59. 720P59.
720P119. 720P59.
*2 Depending on the format of the synchronization signal to be output, variable range for H PHASE and V PHASE varies.
Synchronization Signal Output H PHASE V PHASE
1080I59. -1100 to 1100 -563 to 563
1080P23.SF -1375 to 1375 -563 to 563
1080P23. -1375 to 1375 -563 to 563
720P59. -825 to 825 -375 to 375
*3 When all items other than "1080I59." are selected for "OUT1 FORMAT"/"OUT2 FORMAT" in "HDTV CONT (1/2)," selecting
ON/OFF is enabled.