Ikegami CCU-890, Руководство по эксплуатации, Страница: 123 / 132

6.2 ALARM Indicator on the Control Panel Flashes ON and OFF
CCU-890 0804 VER2 (U) (E)
109
CCU (DUAL Mode) Status of the module required due to the
DUAL LINK (HS TYPE) specifi cation of the
CCU CCU: Dual The CCU is in the perfect state for the DUAL
LINK (HS TYPE) specifi cation.
(The E/O&O/E module supports DUAL LINK (HS
TYPE) and the HDTV PROC module is installed
in the slot of the SDTV PROC module.)
CCU: Dual
VIDEO OUT is
not Dual! The VIDEO OUT module is not exclusively for
DUAL LINK (HS TYPE) .
Warning! Dual
Module
E/O O/E only The modules other than the E/O&O/E module
are not exclusively for DUAL LINK (HS TYPE) .
Warning! Dual
Module
HDTV PROC
only The modules other than the HDTV PROC module
are not exclusively for DUAL LINK (HS TYPE) .
Warning! Dual
Module
VIDEO OUT
only The modules other than the VIDEO OUT module
are not exclusively for DUAL LINK (HS TYPE) .
Warning! Dual
Module
E/O O/E,
VIDEO OUT The HDTV PROC module is not exclusively for
DUAL LINK (HS TYPE) .
Warning! Dual
Module
HDTV PROC,
VIDEO OUT The E/O&O/E module is not exclusively for DUAL
LINK (HS TYPE) .
CCU Battery Status of the battery in the CCU CONT/REF
module OK Normal
NG The backup battery voltage is low.
CCU Memory Status of the RAM IC memory in the CCU
CONT/REF module OK Normal
NG Data in the module is destroyed.
CCU Fan Rotating status of the fans on the rear and
inside of the CCU OK Normal
NG Any of the three fans is not working.
Genlock Status of external SYNC signal INT No external SYNC signals are input (operation is
performed with internal SYNC signals.)
NTSC When external SYNC signal is NTSC
1080I59. When external SYNC signal is 1080I59.94
1080P23. When external SYNC signal is 1080P23.98
720P59. When external SYNC signal is 720P59.94
720P23. When external SYNC signal is 720P23.98
PAL When external SYNC signal is PAL
1080I50. When external SYNC signal is 1080I50
720P50. When external SYNC signal is 720P50
720P24. When external SYNC signal is 720P24
UNKNOWN External SYNC signals are input, but
synchronization is not performed.
10 Field Lock (To be supported in the future) Only when
Head Format is "1080P23" LOCK (To be supported in the future)
UNLOCK
CCU to Head
Comm Status of the command signal sent from the
CCU to the camera head OK Normal
NG No command signals are sent, or a CPU error
occurs.
Head to CCU
Comm Status of the command signal sent from the
camera head to the CCU OK Normal
NG No command signals are sent, or a CPU error
occurs.
DC Screen Screen mode status of the SDTV output
signal *** ("***" is displayed for the diagnosis result since
the down converter function is disabled in the
DUAL LINK (HS TYPE) specifi cation.)
UC Screen Screen mode status of up converted signal 4:3 The aspect ratio is 4:3
16:9 The aspect ratio is 16:9
LB 16:9 Letterbox 16:9
LB 14:9 Letterbox 14:9
LB 13:9 Letterbox 13:9