Ikegami Electronics HEM-1770WR, Руководство по эксплуатации

Страница: 67 / 88

- 57 -
ղ
Change of preset data
࣭
Change the data of a file selected in ""(a) Selection
of files" on the preceding page.
࣭
How to change data
Select “CHANGE DATA” and press the
ENT
switch. The following “CHANGE DATA” menu
appears.
࣭
Adjustable
࣭
HUE
Used to set the hue (only for NTSC signals).
Variable range : -18.0
㹼
+17.7
࣭
Default setting is 0.0.
࣭
CHROMA
Used to set the color density.
Variable range : 0.0
㹼
200.0
࣭
Default setting is 100.
࣭
BRIGHT
㸦
BRIGHTNESS
㸧
Used to set the black level.
Variable range : -100.0
㹼
+60.0
࣭
Default setting is 0.0.
࣭
CONT
㸦
CONTRAST
㸧
Used to set the white level.
Variable range : 0.0
㹼
100.0
㸦
WIDE : 0.0
㹼
200.0
㸧
࣭
R.BKG
㸦
R.BACKGROUND
㸧
Used to set the black balance (red component)
in the dark zone.
Variable range : -100.0
㹼
+100.0
࣭
Default setting is 0.0.
࣭
G.BKG
㸦
G.BACKGROUND
㸧
Used to set the black balance (green compo-
nent)in the dark zone.
Variable range : -100.0
㹼
+100.0
࣭
Default setting is 0.0.
࣭
B.BKG
㸦
B.BACKGROUND
㸧
Used to set the black balance (blue compo-
nent)in the dark zone.
Variable range : -100.0
㹼
+100.0
࣭
Default setting is 0.0.
࣭
R.GAIN
Used to set the white balance (red component)
in the bright zone.
Variable range : 0.0
㹼
+100.0
࣭
Default setting is 100.0.
࣭
G.GAIN
Used to set the white balance (green compo-
nent)in the bright zone.
Range : 0.0
㹼
+100.0
࣭
Default setting is 100.0.
࣭
B.GAIN
Used to set the white balance (blue compo-
nent)in the bright zone.
Range : 0.0
㹼
+100.0
࣭
Default setting is 100.0.
࣭
GAMMA
Sets the gamma setting.
CRT gamma is resembled to the gamma of
Ikegami CRT master monitor HTM-1990.
Range : 2.2, 2.4, CRT
࣭
Default setting is 2.2.
࣭
RASTER
This is enabled only for the CRT GAMMA, and
it sets the raster brightness.
Since the raster brightness of CRT monitor
varies depending on the CRT, you can adjust it
to your CRT monitor.
Variable range: 1 (dark) to16 (bright)
࣭
Default setting is 9.
࣭
APT LEVEL
Used to set the aperture level.
Variable range : 0
㹼
63
࣭
Default setting is 16.
࣭
APT FREQ.
Used to set the aperture frequency.
LOW Boosting from approx. 10MHz
MID1 Boosting from approx. 15MHz
MID2 Boosting from approx. 20MHz
HIGH Boosting from approx. 25MHz
࣭
Default setting is HIGH.
㻜㻚㻝 㻝 㻝㻜 㻝㻜㻜
㻵㻺㻼㼁㼀㻌㻿㻵㻳㻺㻭㻸
㼇䠂㼉
㻜㻚㻜㻜㻜㻝
㻜㻚㻜㻜㻝
㻜㻚㻜㻝
㻜㻚㻜㻜㻜㻜㻝
㻜㻚㻝
㻝
㻝㻜
㻝㻜㻜
㍤ᗘ
㼇㼏㼐㻛䟝㼉
LCD CRT
Ț
OLED
㻜㻚㻝 㻝 㻝㻜 㻝㻜㻜
㻵㻺㻼㼁㼀㻌㻿㻵㻳㻺㻭㻸
㼇䠂㼉
㻜㻚㻜㻜㻜㻝
㻜㻚㻜㻜㻝
㻜㻚㻜㻝
㻜㻚㻜㻜㻜㻜㻝
㻜㻚㻝
㻝
㻝㻜
㻝㻜㻜
㍤ᗘ
㼇㼏㼐㻛䟝㼉
Raster compensation
%%5,*+71(66
%%5,*+71(66