manualshive.com logo in svg

Ikegami Electronics HEM-1770WR, Руководство по эксплуатации

Поделиться
Скачать
Ikegami Electronics HEM-1770WR Скачать руководство пользователя страница 65

 

- 55 - 

4-17

㸬

Description of MENU 14 Functions 

㻌

㻌

 
 
 
 
 
 
 
 
 

ձ

  Displaying the MPU version

 

࣭

Displays the current software version. 

 

ղ

  Displaying the FPGA 1/2 version

 

࣭

Displays the current software version. 

 

࣭

㻌 䠌䠎㻌 䠋㻌 䡔䠌䠌㻌

㻌 㻌 㻌
㻌
㻌
㻌
㻌

 

 

 
 
 
 

ճ

  Displaying the working time

 

࣭

Displays the accumulated time since the power 

was turned on. 

࣭

The time for the internal fan that is always in op-

eration is equivalent to this accumulated time. 
The time for the rear fan is shown in the section 

յ

. 

 

մ

  Panel display time display 

࣭

The accumulated time for the panel display being 

ON is displayed as an indication of the time for the 
panel being displayed. 
This means that the time for when the display is 
turned off using "SCREEN OFF" and the time for 
when the "SCREEN SAVER" is activated and the 
display is turned off are excluded from the opera-
tion time of 

ճ

.      The accumulated time does not 

include the time for no signal. 

 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 

յ

 Rear fan operationg time display 

࣭

Although the rear fan is operated according to the 

internal temperature, the accumulated operation 
time will be displayed. 

 

ն

  

Displaying the optional modules mounted 

Ȇ

Displays the optional module currently mounted

!

on the monitor. 

Ȇ

The following message appears when no corre-

sponding optional module is installed. 

Ȩ

Ѝ

!

NO OPTION

ȩ!

Ȇ

The following appear when an optional module is 

installed. 

Ѝ

CM-70 

㸸

When equipped with the CM-70. 

Ѝ

SP-70 

㸸

When equipped with the SP-70.

Ѝ

*****: Added as necessary with the version up. 

 

շ

  

FAN ERROR 1/2 display

 

Ȇ

If the internal or external fan on the rear side is 

stopped, the message ”FAN ERROR!” is displayed, 
which allows you to check which fan is stopped. 
It is displayed with flashing red letters as de-
scribed below. 
FAN ERROR 1: External fan on the back side. 
FAN ERROR 2: Internal fan 

 
 

 

 
 

 

 
 

 

Indicates the version of FPGA 
that is mounted with a future 
extension module. ”x00” indi-
cates that FPGA is not mounted.

Indicates the version of 
FPGA that is mounted on 
the main unit. 

Содержание HEM-1770WR

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды