Ikegami Electronics HEM-1770WR, Руководство по эксплуатации

Страница: 11 / 88

- 1 -
HEM-1770WR/2570W Full HD Multi-Format OLED Color Monitor
1
㸬
Outline
㻌
1-1
㸬
Outline
This monitor has a 17-inch/25-inch full HD
OLED panel aiming to reduce the thickness,
weight and power consumption, and is a
HDTV/SDTV multi-format compatible OLED
color monitor that is intended to be used in vari-
ous spaces such as sub-control room, edit and
monitor shelf, transmission control desk, and re-
lay mobile.
By taking the functions and operability of Ike-
gami CRT master monitor HTM series, it
achieves the functions that are required for mas-
ter monitor used in professional broadcasting and
provides the same operability as a conventional.
㻌
1-2
㸬
Features
(1) High performance OLED panel
The OLED panel has a full HD (1920 x
1080)/10bit panel with high brightness, high con-
trast, wide view angle, high speed response, and
high color reproducibility, which achieves the re-
alistic pixel display without resizing the input
pixels and the gradation expression with higher
fidelity.
㻌
(2) Multi-format
The monitor supports various broadcasting
formats.
࣭
480i/59.94 (NTSC)
࣭
1080p/24, 23.98
࣭
575i/50 (PAL-B)
࣭
1035i/60, 59.94
࣭
480i/59.94 (*1)
࣭
1080i/60, 59.94
࣭
1080psF/30
࣭
1080i/50
࣭
1080psF/25
࣭
720p/60, 59.94
࣭
1080psF/24, 23.98
࣭
720p/50
࣭
1080p/60, 59.94
࣭
720p/30, 29.97
࣭
1080p/50
࣭
720p/24, 23.98 (*2)
࣭
1080p/30, 29.97
࣭
720p/25
࣭
1080p/25
(*1) RGB/YPbPr input only
(*2) SDI input only
(3) Diverse input sources
SDI signal (3G/HD/SD) 2 input, analog com-
posite signal 2 input, DVI-D signal 1 input
(VGA/SVGA/XGA/WXGA/SXGA/UXGA/WUXGA)
are included as standard.
Analog PC input and YPbPr/RGB input are
also available. With the optional SFP modules (2
units) mounted, it can accommodate various in-
puts.
(4) Compatibility with embedded audio
It supports the embedded audio as a standard,
and automatically recognizes the embedded audio
signal that is multiplexed to 3G-SDI signal,
HD-SDI signal, and SD-SDI (4:2:2) signal. It also
enables the audio output from the built-in stereo
speaker, stereo headphone, and stereo line out.
(You can select which pair channels to be output
on the MENU.)
The monitor also has a standard embedded
audio level meter display on the screen.
(5) Remote control functions
The monitor can be remote-controlled with the
use of three remote control functions. Depending
on the place of installation and type of operation,
the parallel, serial mode can be used.
Besides the remote control with a conventional
parallel, an input interface of the serial remote
controller SRC-400 (optional) that can be remote
controlled by RS485 is equipped as a standard.
The SRC-400 allows you to remote control up to
96 monitors individually by connecting the moni-
tors with loop-through using RS485. In addition,
since the Ethernet connection between a control-
ler and PC is possible, you can individually con-
trol the monitors that are connected to RS485 via
SRC-400 from the PC screen. The infrared wire-
less remote controller RCT-30A is also set as op-
tional.
(6) Built-in markers
4:3 (16:9 mode), 13:9, 14:9, 15:9, 16:9 (4:3 mode),
1.85:1 (16:9 mode) and 2.35:1 (16:9 mode) line
markers can be displayed.
The monitor can also get the 1%-stepwise
safety marker displayed in the range of 80-99%
with respect to the line marker area.
The safety markers over the effective screen
can be equally preset 1% by 1% in the range of
80-99%.
The monitor also comes standard abundantly
with five-part split and ten-part split crosshatch
markers useful for location alignment.
(7) User marker display function
Up to 100 types (10 scenes x 10 types) of user
markers can be plotted. Also up to 10 types of
lines or BOX markers per 1 scene can be plotted
to a given positions and sizes on a pixel basis, and
10 scenes can be set.
The line and box drawing settings can be eas-