Ikegami Electronics HEM-1770WR, Руководство по эксплуатации

Страница: 16 / 88

- 6 -
տ APT
switch
࣭ !
Press this switch to select the aperture.
࣭ !
Set a correction amount on PRESET MENU.
* In the PC input mode, this function is disabled.
ր
SCREEN
switch
࣭
Press this switch to display images in R, G or B
individually.
࣭
The switching between colors takes place as fol-
lows each time this switch is pressed.
“R only”
Ѝ !
“G only”
Ѝ !
“B only”
Ѝ !
“Normal-
Screen”
* In the PC input mode, this function is disabled.
㻌
ց !
MARK
switch
࣭ !
Press this switch to turn on/off markers.
࣭ !
To change icons, use the and switches.
Detailed settings are made on MENU 8.
* This function is disabled when an internal test
signal is displayed or in the PC input mode.
ւ !
CHROMA
manual control
࣭
This control serves as a manual/preset switch for
chroma or a manual data variable control.
࣭
The control pops out when it is pressed and the
mode is changed to MANUAL.
փ ! BRIGHT
manual control
࣭
This control serves as a manual/preset switch for
brightness or a manual data variable control.
࣭
The control pops out when it is pressed and the
mode is changed to MANUAL.
ք
CONT
manual control
࣭
This control serves as a manual/preset switch for
contrast or a manual data variable control.
࣭
The control pops out when it is pressed and the
mode is changed to MANUAL.
AUDIO
control
࣭
Use this control to adjust the sound volume of the
front speaker or the headphones.
* An audio (analog/embedded audio) to be output-
ted to the speaker must be set on MENU7.
ALARM LED
a) ABL
indicator
࣭ !
The LED flashes slowly (0.5 sec. interval) during
the ABL (Auto Brightness Limitter) operation.
࣭ !
ABL is a signal having a high brightness. When
the contrast or brightness is increased, the cur-
rent will be limited inside the panel to protect the
panel and the brightness will be automatically
restricted. Then, the LED flashes.
࣭ !
Please reduce the contrast or brightness to use.
If both the ABL and OVER RENGE are operated,
LED flashes quickly (approx. 0.25 sec. interval)
b) OVER RENGE
indicator
࣭ ! OVER RANGE increases the contrast or brightness
with high brightness signal. If it exceeds the dynamic
range of the signal processing circuit, the LED lights
up
.
࣭ !
Please reduce the contrast or brightness to use.
࣭ !
If both the ABL and OVER RENGE are operated,
LED flashes quickly (approx. 0.25 sec. interval)
Infrared receiver of wireless remote control
࣭ !
When a wireless remote controller (RCT-20A/
RCT-30A) is used, point it towards this receiver.
Stereo headphones output
(stereo mini-jack
type)
࣭ !
Analog audio signals, embedded audio signals
and downmix audio signals are fed out of this
terminal.
࣭ !
The analog and embedded inputs can be selected
on MENU7.
*
If you are using a sound isolating headphone,
some residual sound may be heard even when the
sound volume is all the way down.
USB
terminal
࣭ !
Connect a USB memory, and the monitor’s data
can be saved on the USB memory or the data on
the USB memory can be downloaded on another
monitor.
࣭ !
Connect a USB mouse, and the user markers can
be drawn.
࣭ !
Connect the ASP-100 Rev2 to automatically ad-
just the color temperature.