6
Operating Instructions 2.4 GHz 6-Channel Transmitter NG-6
Technical Specifications
System:
6-channel transmitter
Operating Voltage:
9.6-12V
Transmitter Frequency: 2.4 GHz
Signal Transmission:
FHSS
Battery Voltage
Antenna
On/Off Switch
Trim Lever
Control Stick for
Throttle (Mode 2)
or Forward Pitch/
Elevator (Mode 1)
and Tail/Rudder
Strap Mount
Trim Lever
Control Stick for
Throttle (Mode 1)
or Forward Pitch/
Elevator (Mode 2)
and Roll/Aileron
2-Step Switch
Channel 6
Overview transmitter front
(Pic. 1)
3-Step Switch
Channel 5
Mixer
ATV
Servo
Reverse
Switch*
Status LED
Programming
Knob
System Description
This remote control unit is a 6-channel hand held transmitter for controlling model airplanes and
helicopters. The four main channels can be reversed in their operating direction directly at the
transmitter. This simplifies the servos installation in your respective model.
The simulator connector on the back of the transmitter allows the connection of your transmitter to a
PC via an interface cable (with 3.5 mm stereo cinch connector). This way you are able to control R/C
flight simulator programs such as “Aerofly 5” or EasyFly3” with your transmitter.
Battery
Compartment (on
back of transmitter)
Simulator Interface
Connector (on back
of transmitter)
Charge Jack
* The imprints on the transmitter are referring to Mode 2: AIL (aileron, roll) = Channel 1, ELE (elevator, pitch forward) =
Channel 2, THR (throttle, pitch) = Channel 3, RUD (rudder, tail control) = Channel 4.
