The receiver: You could possibly strip the body for even more
weight reduction. Check with your warranty!
We recommend, Ikarus Master Gyro Order No. 720610, Telegyro
(Order No. 720611), Profi Gyro (Order No. 720613), Micro Gyro
(Order No 720615) and Mini Gyro (Order No. 720654).lightweight
and compact, developed especially for small helicopters.
Use vibration absorbing servo tape to fix the receiver and the gyro
onto the r/c-plates.
The speed controller V90 is a microcomputer based system that
can easily be adapted to any R/C-System. The motor starts only
after certain procedures on the transmitter. The Controler V90 fits
perfectly well into the main frame and allows short wiring to the
battery and to the motor.
When working on the helicopter with a battery
connected accidents may happen due to
unexpected motor start. When working on the
helicopter please always remove the motor
Insert the battery into the undercarriage and adjust the
center of gravity.
Hold the helicopter at the flybar. The helicopters nose
should drop down a little. Adjust by moving the battery to
Keep the wires as short as possible!
Use 2,5 mm² silicon insulated wire to the motor and to
the battery.
Secure the wires against heat and moving parts.
Keep the motor and battery wires away from the
antenna and the receiver.
Avoid connectors between the controller and the
Use an Y-Adapter cable with electronical mixing.
Plug the end of the cable in the output of the receiver.
Now connect both of the ends of the Y-Adapter cable with
the speed controller and the pitch servo.
You may have to extend the connection cable of the
tailrotor servo with an additional extension piece.
