IKA WERKE IKAMAG RET control-visc, Руководство по эксплуатации

Страница: 27 / 110

RETCV_0107
Page
1 Warranty 2
2 Safety instructions 27
3 Proper use 28
4 Unpacking 28
5 Commissioning 29
6 Control elements 29
7 Display 29
8 Switching on 30
9 Default settings 30
9.1 Resetting parameters to factory 31
default settings (RESET)
10 Modes of operating 31
10.1 A Mode of operating 31
10.2 B Mode of operating 31
10.3 C Mode of operating 31
10.4 X1 Mode of operating 31
10.5 Reversing the modes of operating 31
11 Function heating 32
11.1 Control of medium temperature with Pt 100 32
temperature sensor
11.2 Medium temperature control with twin 32
Pt 1000 temperature sensors
11.3 Medium temperature control without external 33
temperature sensors
11.4 Residual heat warning (HOT) 33
11.5 Changing the temperature unit of measure- 34
ment from °C; °F
11.6 Setting the safety temperature 34
12 Function stirring 34
12.1 Intermittent mode 34
12.2 Stirring bar breakaway monitoring 35
12.3 Setting the intermittent mode and the stirring 35
bar breakaway monitoring fonction
12.4 Measurement of viscosity trend 35
Contens
Page
13 Tips 36
14 Connections and interfaces 36
14.1 RS 232 C serial interface 37
14.1.1 Configuration 37
14.1.2 Instruction syntax 37
14.1.3 Overview of the NAMUR-instructions 37
14.1.4 “Watchdog” -function, monitoring the 40
serial data flow
14.2 Connections between RET control-visc /C 40
and external devices
14.2.1 PC 5.1 Adapter IKA - Control
40
14.2.2 PC 2.1 Cable 40
14.2.3 PC 1.5 Cable 40
14.2.4 PC 1.2 Adapter 41
14.2.5 AK 2.1 Cable 41
14.2.6 AK 2.2 Cable 41
14.3 Tips on using labworldsoft 41
15 Faults 41
15.1 Troubleshooting. Error messages, 42
causes and solutions
16 Maintenance and cleaning 45
16.1 RET control visc C Technical Enamel 45
16.1.1 Protective conductor RET control visc C 45
17 Associated standards and regulations 45
18 Accessories 46
19 Technical data 47
20 List of spare parts RET contol visc /C
106
21 Spare parts diagram RET contol visc /C 107
26