IKA SMRA + MRA, Руководство пользователя

Страница: 21 / 40

SMRA - SSI and BiSS
NOTE
For any information on the structure of the position information word, please
refer to the “5.2 MSB left aligned protocol” section on page 19.
The operating or fault status of the device is shown visually also by the LED
installed laterally in the sensor, refer to the “7 - Diagnostic LED” section on page
33.
For any information on errors and their solution please refer to the sections “8 -
Error and fault diagnostics” on page 34 and “10 - Troubleshooting” on page 36.
5.5 Helpful information
•
The position information increases when the ring rotates as indicated by
the arrow in Figure 1.
•
At installation always execute a zero setting operation of the position.
5.6 Recommended SSI circuit
MAN SMRA SSI_BiSS E 1.4.odt 5 - SSI interface 21 of 40