IKA Plate RCT digital, Руководство пользователя

Страница: 7 / 36

9
/// Power supply / Switching off the device
Warning!
› The device will automatically restart in mode B following any interruption to the power
supply�
› The voltage stated on the type plate must correspond to the mains voltage�
› The outlet for the mains plug must be easily accessible�
› The device can only be disconnected from the mains outlet by pulling out the power cord set
or the connector plug�
/// For protection of the equipment
› The device may only be opened by qualified and IKA approved experts�
› Do not cover the device, even partially e�g� with metallic plates or film� This may result in
overheating�
› Protect the device and accessories from bumps and impacts�
› Keep the base plate clean�
› Observe the minimum distances:
- between devices min� 100 mm,
- between device and wall min� 100 mm,
- above the device min� 800 mm�
mm 100 >
mm 100 >
mm 100 >