IKA MICROSTAR digital, Руководство пользователя

Страница: 10 / 14

25 24
/// Assembling the stirring shaft protector
Stirrer
Screw
R 300
/// Securing the mixing vessel to the stand
Clamping bolt
Stand
Vessel
Clamping band
Strap clamp
Commissioning
/// Start-up
Secure the device to a stable stand with a cross sleeve.
The stirring vessel must always be securely fixed for safety reasons. You must also ensure
that the mounting device (stand) is set up in such a way that it is not liable to topple and
does not start to move during the stirring procedure.
If these conditions have been met, the machine is ready for operation when the mains
plug is plugged in. If these conditions are not met, safe operation is not guaranteed and
the machine could be damaged.
Observe the ambient conditions (temperature, humidity, etc.) listed under “Technical Data”.
The AC adapter is suitable for 100 VAC to 240 VAC.
The exchangeable adapter for the relevant country must be attached before the AC
adapter is plugged into the mains socket.
Switching on/off
1.
After connecting the power to the device or touching the standby key (A) more than 1
second, the device is switched on. Following screens appear:
2.
After that, the following screen appears automatically.
Software version
Self test screen
Device identification
3.
Then, the device is ready for operation.
4.
After switching off the device by touching the standby key (
A
) more than 1 second,
following screen appears:
Last speed setting
Standby LED